Table of Contents
Advertisement
5. Installation
1
2
5.5
Oil connection
48
5.4.7.
Filling the condensate trap
CAUTION
If operating with the siphon empty, combustion products
will escape into the premises in which the boiler is
installed.
1. Pour water into the flue gas conduit (central pipe) until it flows out
of the condensates discharge pipe 2 .
C003257-A
5.5.1.
General
4 Use a single-pipe system and mount the oil filter with the deaerator
and the stop valve (provided with the boiler). The negative
pressure required for the oil supply must be less than 0.35 bar
(0.035 MPa).
4 Use of a floating strainer is strongly recommended to prevent
deposits being sucked up from the bottom of the tank.
4 If replacing the boiler, clean the tank.
AFC 18 - AFC 24 - AFC 30
09/07/2015 - 300026439-07
Advertisement
Table of Contents
