AFC 18 - AFC 24 - AFC 30
5.4
Hydraulic connections
09/07/2015 - 300026439-07
5.4.1.
Flushing the system
Installation must be carried out in accordance with the prevailing
regulations, the codes of practice and the recommendations in these
instructions.
n Fitting the appliance to new installations
4 Clean the installation with a universal cleaner to eliminate debris
from the system (copper, hemp, flux).
4 Thoroughly flush the installation until the water runs clear and
shows no impurities.
n Fitting the appliance to existing installations
4 Remove sludge from the installation.
4 Flush the installation.
4 Clean the installation with a universal cleaner to eliminate debris
from the system (copper, hemp, flux).
4 Thoroughly flush the installation until the water runs clear and
shows no impurities.
5.4.2.
Connecting the expansion vessel
5. Installation
43