Table of Contents
Advertisement
8. Checking and maintenance
8
Checking and maintenance
8.1
General instructions
8.2
Chimney sweep instructions
128
WARNING
Maintenance operations must be done by a qualified
4
engineer.
An annual inspection is compulsory.
4
Only original spare parts must be used.
4
4 Have the flues swept at least once a year or more, depending on
the regulations in force in your country.
¼See chapter: "Chimney sweep instructions", page 128
4 Carry out the inspection and standard maintenance operations
once a year.
¼See chapter: "Standard inspection and maintenance
operations", page 131
4 Carry out specific maintenance operations if necessary.
¼See chapter: "Specific maintenance operations", page
142
CAUTION
Have the flues swept at least once a year or more,
depending on the regulations in force in your country. Only
a qualified engineer may carry out the following
operations.
1. Press the - key (TRADITIONAL mode).
2. Check the combustion each time the flues are swept.
Turn the rotary setting button to display the PMIN parameter. Turn
the rotary setting button to display the PMAX. parameter
3. To go back to the main display, press key j 1 times.
AFC 18 - AFC 24 - AFC 30
09/07/2015 - 300026439-07
Advertisement
Table of Contents
