AFC 18 - AFC 24 - AFC 30
09/07/2015 - 300026439-07
8.5.1.
Replacing the ignition electrodes
n Not authorized adjustment methods
CAUTION
Do not to put stress on the porcelain at the electrode base,
breaking risk!
Incorrectly adjusted electrodes increases wear and may
cause their short circuit.
C003898-B
n Recommended setting method (For example: 30 kW)
1. Loosen the screw F located on support E.
2. Remove the ignition electrodes.
3. Put the new ignition electrodes in place.
4. Adjust the gap on the electrodes to 4-5 mm.
C003897-B
8. Checking and maintenance
143