Otto Bock 13E135 Instructions For Use Manual page 6

the plaster interim socket or on the interim socket made of ThermoLyn
(616T52, 616T53 or 646T69). This allows the patient to begin training his
movements during the initial phase of rehab, creating a smoother transition
to the final prosthesis.
3Use
The 13E135 Electrode Mount can be used with the 13E200=* Ottobock
Electrode.
4SafetyInstructions
Follow the safety instructions and the precautions specified in this ac-
companying document.
ATTENTION!
Advise your patient that driving vehicles of any kind or operating
machinery is strictly forbidden while using the interim socket.
ATTENTION!
Only use the Electrode Mount 13E135 in workshop or during a
visit to a rehabilitation center.
5ScopeofDelivery
1 pc Electrode Mounting Set 13E135
1 pc Manual 647H472
6MountingInstructions
1.) Transfer the previously determined electrode position to the interim
socket and drill a 35 mm diameter hole.
2.) Lay the electrode cable into the opening of the electrode mount and
press into place (fig. 1).
3.) Use cloth tape to affix the electrode mount and the electrode cable to
the interim socket of the patient.
6.1 Example for mounting of the Ottobock Electrodes
Fig. 1 Electrode 13E200=50, 13E200=60
6 | Ottobock