Tektronix MTM400 User Manual page 91

MTM400 MPEG Transport Stream Monitor User Manual
PID Group Management
This section describes how to add, edit, and remove PID Groups. Only an
Administrator can add and delete PID Groups.
Adding a New PID Group.
PID Groups are created in three stages:
Identify the PIDs to be grouped.
Create a new, named PID Group.
Populate the new PID Group.
The procedure is as follows:
1. Use the PID screen to identify the PIDs to be grouped. The hex or the decimal
PID can be used.
2. In the PID Group screen, select New PID Group....
3. Enter the PID Group name.
Select OK. Selecting Cancel will end the PID Group creation.
Stream View
3-43