SHOWTEC Performer Profile IP Q4 Manual page 20

Performer Profile IP Q4
02) Press the UP/DOWN buttons to choose one of the 10 custom programs.
03) Press the ENTER button to confirm. Each program can consist of up to 30 customizable scenes.
The display will show:
04) Press the UP/DOWN buttons to select the desired scene.
05) Press the ENTER button to enter scene settings. The display will show:
06) Press the UP/DOWN buttons to toggle through the following options:
● RED: 0–255, from dark to brightest
● GREEN: 0–255, from dark to brightest
● BLUE: 0–255, from dark to brightest
● WHITE: 0–255, from dark to brightest
● ZOOM: 0–255, from small to big
● FOCUS: 0–255
● GOBO: 0–255, position of the gobo
● STROBE: 0–25, from low to high strobe frequency
● TIME: Scene duration, 0–255 seconds
● FADE: Transition time between the scenes, 0–255 seconds
07) Press the ENTER button to open the desired option.
08) Press the UP/DOWN buttons to adjust settings.
09) Repeat steps 7–8 to adjust the remaining settings.
10) Press the MENU button to return to step 4 and choose another scene.
11) Repeat steps 4–10 to edit the remaining scenes.
Note: For each custom program you can create up to 30 scenes, which makes it possible to create a
maximum of 300 customized scenes.
Note:
ZOOM and FOCUS will be reset only if a DMX signal is present during start-up of the Performer.
When a DMX signal is not present during start-up, ZOOM and FOCUS will not be reset and it will not be
possible to adjust their values. (It is useful when using the Performer in fixed installations.)
Order code: 33111
19