PLACEMENT OF SEAM AT REAR BOW
Now, stretch the headlining round the
rear window
in
such
a
way
Then fasten with tape, as described
Fit the headlining at the
rear gross bar, and
that the holes
in the headlining and those
are
centred
on
each
other.
INSTALLATION
OF
MOULDING
Fit the rear shelf, windows, sun Visors, dome lanvlliitlh back
loop brackets, side trims, and rear seat cushion
rest.
The removal is made in the reverse order.
S
1296
lower edge of the
that
there
are
no
wrinkles.
before.
make sure
In the sheet
S
AT THE
REAR CROSS
curve
MATS
The rubber mats at the front sides are glued to the wheel
houses, while the front and rear mats are loose. AS from
model
1968, the mats are of nylon fiber on jute backing-
They are secured by snap buttons and velcro gripS-
Insulating sheets of wallboard are fitted under the floor
mats.
1297
BAR