Model - Saab 95 1967 Service Manual

REAR MUFFLER
Removal

1.

Jack up the R.H. side of
wheel, and loosen the exhaust pipe clamp at the rear
muffler.
2_ Up to and incl.

model

1975:
nuts by means of which
MUFFLER SUSPENSION,
REAR
1975
As from model 1976: Unhook the
from the hooks.
REAR MUFFLER SUSPENSION, AS
3. Detach the muffler from the exhaust pipe and remove
the muffler.
Fobr 1977
the car. Remove the rear
Back off the two upper
the muffler is suspended.
$550
UP TO AND INCL. MODEL
rubber suspension
$5311
FROM MODEL 1976
Installation
1. Pass the muffler onto the
the clamp.
2. Fit the muffler to the bracket
wall.
3. Tighten the clamp at the
the muffler.
4. Check that the exhaust
tension, vibrations can in this case occur and give
noise in teh car body.
5. Start the engine and check for
6. Remount the rear wheel, and
EXHAUST PIPE
Removal
Jack up the right side of the car
1. Take off the right rear wheel
joining the exhaust pipe to the rear muffler.
2. Loosen the muffler suspensions
Up to and incl. model 1975: Back off and remove the
upper nuts with which the
As from model 1976: Unhook
from the hooks. Pull the
3. Undo the clamp joining the exhaust
muffler.
4. Up to and incl. model 1975:
nuts with which the exhaust
floor.
5. Pull the exhaust pipe off the front
Reassembly
Reassembly takes place in the reverse order.
Make sure that the exhaust
muffler pipe connections, thus ensuring
when the clamps are tightened
the rubber cushions at the floor
is mounted under tension, vibrations
in the body of the car.
exhaust pipe. Don't forget
on the wheel house
nto
exhaust pipe connectio
system is not mounted under
leaks.
lower the car.
before starting work.
and release the clamp
at the body.
rear muffler is supended.
the rubber suspensions
muffler off the exhaust pipe.
pipe to the front
Back off and remove the
pipe is secured under the
muffler.
pipe is properly fitted in the
effective sealing
and precluding tension
plate. If the exhaust pipe
may easily develop
252—3
in