Model 1971 - Saab 95 1967 Service Manual

Carburetor, make Ford, models
1976 and 1977
REMOVAL
1. Remove the air cleaner.
2. Disconnect the fuel line,
vacuum hose from the carburetor.
3. Unscrew the choke control
unhook the throttle cable.
4. Remove the carburetor.
REMOV'NG THE CARBURETOR
5. Blank off the end of the
Dismantling
1. Undo the float chamber
lift off the cover, at the same time unhooking the
link to the choke.
FLOAT CHAMBER COVER
THE
231-12
the ventilation hose and the
from the carburetor and
inlet channel.
cover retaining bolts and
IS LIFTED OFF
m
t. Rem
Remove the gaske
from the acceleration fue
housing.
BALL AND WEIGHT IS REMOVED
2. Remove the acceleration
move the cover, diaphragm
Remove the connecting
throttle valve lever and
bolt the acceleration pump arm from the throttle
shaft.
3. Remove the mixture screw
save the springs. On 1977
the seal from above the
Make a hole in the top
work it free.
4. Remove the throttle valve.
5. File away any burrs around the screw holes
throttle shaft. Remove the shaft.
6. Remove the float. Unscrew the
the filter.
7. Unbolt the choke lever and
8. Remove the main jet.
9. Dismantle the choke valve.
10.
File off any burrs around the screw holes in the
choke valve shaft. Withdraw the shaft.
ove the ball and the weight
massage by inverting the
pump cover bolts and re-
and spring.
rod from between the
the acceleration pump. Un-
and the idling screw and
model cars, first remove
mixture adjusting screw.
of the plastic plug and then
in the
needle valve, saving
save the spring.