Table of Contents
Advertisement
4) Machine operation
Caution
5) Machine troubleshooting
Danger
8
Instructions here should be observed. Otherwise the user could face mechanical damages such
as the functional obstacles and breakdowns. Therefore, the following preconditions should be
fulfilled.
1) Don't put things on the table of machine.
2) Don't use crooked needle or needle whose tip is blunt.
3) Use needle plate fit for the work
In need of troubleshooting, it should be done by the trained A/S engineer of our company.
1) Before cleaning and repair, be sure to shut off the power supply. And wait for about 4
minutes until the machine discharges completely.
[Caution] For main motor, X/Y drive box, it takes 10 minutes to discharge
completely after the power is shut off.
2) Even specification or a part of or the entire machine should not be modified without any
consultation with our company. The modification would undermine safety of the operation
3) In case of repair, you should replace the damaged part with the genuine parts of our
company (SunStar).
4) After repair, please put again the safety covers disjointed during repairing.
Advertisement
Table of Contents
