13) Adjust hook lubrication
ⓐ Turn the screw ① toward A and lubrication volume will increase.
If it is turned toward B, lubrication volume will decrease.
ⓑ Turn the handle② toward A and lubrication volume will increase.
If it is turned toward B, lubrication volume will decrease.
14) Directions for the Use of USB Flash Drive
1) Remove the USB flash drive from control box during stitching.
2) The format type is required as FAT16 and FAT32 to use common USB flash drive.
3) It is possible to use the USB flash drive in the market but please use the authorized USB flash drive.
Sometimes, USB flash drives on the market might be unrecognized due to the inter-manufacturer difference.
Notice
Please replace the manufacturer in the event of problems.
① Don' t put the USB flash drive near magnetic thins like TV or magnets.
② It should be kept out of overheating, moisture and direct sunlight.
③ Please insert USB flash drive checking insert direction.
④ It is possible to use regardless of the USB flash drive capacity. However, in case of
high capacity, the speed can be slowed a little when reading and writing memory.
①
B
A A
A
②
B
[ Fig. 28 ]
27