Position Of Caution Marks - SunStar SPS/C-5050 Series User Manual

6) Position of caution marks

1) Position of Caution Marks
CAUTION
경 고
Do not operate without finger guard and
safety devices. Before threading, changing
bobbin and needle, cleaning etc. switch off
main switch.
손가락 보호대와 안전장치 없이 작동하지
마십시오.
실, 보빈, 바늘교환시나 청소전에는 반드시
주전원의 스위치를 꺼 주십시오.
WARNING
Physical damage may be caused by winding.
Don't put your hands near the arrow while the main shaft
is rotating
WARNING
Injury may be caused by moving
needle.
Ensure that the machine is in a
stop condition before changing,
threading or rethreading of
needies or changing of needles.
CAUTION
Malfunction of this part could be happened by magnetic force.
Don't put the magnet near this part.
① Turn off the main power before
rotating the main shaft by hand!
② Do not remove covers during
operation!
③ Turn off the main power before
opening electricity-related boxes!
The labels of "Caution" are attached to the machine for safety. When operating the machine,
make sure to follow the safety rules that each "Caution" tells.
WARNING
WARNING
Physical damage may be caused
by interposition.
While embroidery frame is running
according to the direction of
embroidery frame may be injured
your hands by gap between fixed
body and embroidery frame.
WARNING
Physical injury may be caused by
crevice.
Don' t put your finger in a groove
on the table.
WARNING
Injury may be caused by
winding.
Be sure to turn off the power
before cleaning, lubricating,
adjusting or repairing.
WARNING
Physical injury may be caused
by crevice.
Don' t put your finger in a groove
on the table.
9