E. Table Leg Base
ⓐ Put vibration-proof rubber② under the lever adjuster①.
ⓑ Loosen nut③ and turn the lever adjuster① until the
caster④ makes an idle rotation.
ⓒ After installation, fasten nut③ to fix the lever adjuster①.
F. Attaching air pressure controlling parts
[Caution]
For the safety, do work with the power switch off.
ⓐ Link quick joint socket① to air horse②.
ⓑ Link quick joint socket① to quick joint plug③.
ⓒ Open finger valve④ to inflow air and adjust air pressure to 4.5~5.5kgf/cm
[Caution]
When the air pressure is low under(4kgf/cm
message: Err 24(Low Pressure!)
[Note]
When closing finger valve after use, the remaining air will automatically go out with the remaining pressure displayed at
0kgf/cm
2
(0MPa).
16
2
) during operation, the machine stops with the error message. The error
④
③
①
②
①
③
②
2
(0.44~0.54MPa).
④
[ Fig. 5 ]
[ Fig. 6 ]