Using Bobbin Winder - SunStar SPS/C-5050 Series User Manual

9) Using bobbin winder

1) Names and Functions of main parts
Ⓐ
⑥
⑧
Ⓑ
③
⑤ ④
②
①
⒖
⒕
⑬
⒔
⒃
⑦
⑨
⑫
⑪
⑩
⑮
⑭
[ Fig. 21 ]
① Power SW: Main power switch
② Time: Volume adjusting the amount of thread when wound on bobbin.(MIN↔MAX)
③ Stop: Stop Button
④ Start: Start Button
⑤ Thread Winder Shaft: Shaft winding thread with bobbin inserted
⑥ AC Cord: Power Cable
⑦ Motor
⑧ Board
⑨ Base
⑩ Trans
⑪ Fuse Box: Device for changing fuse
⑫ Switching switch: Select type of power (AC 110V↔AC 220V)
⑬ Ceramic islet: Thread inserting hole
⑭ Holder of Tension Adjustment Device
⑮ Nut: Fix thread holder stand
⒃ Spool Base: Plate-shaped base for spool
※Composed of Spool base, base nut, base sponge, spool holder, and spool stand.
⒔ Tension Adjustment Device: Adjust tension of thread wound on bobbin.
⒕ Thread Holder Stand
⒖ Thread Holder: Device preventing tangle of thread falling from spool
Ⓐ Bobbin Stand: To release left thread of bobbin after use
Ⓑ Hand wheel: Device to turn bobbin which spins along with bobbin shaft
23