Festo CPX-CM-HPP Brief Description page 16

3.3 Power supply of the CPX−CM−HPP
The power supply for the CPX−CM−HPP is provided via the
interlinking block.
The CPX−CM−HPP does not supply any power to the
electronics and sensors via the operating power
supply
The load voltage supply for the valves and digital out
puts is not required.
The CPX−CM−HPP can therefore be combined with all inter
linking blocks.
Interlinking block without supply
Interlinking block with system supply if the space
below the modules to the left of the CPX−CM−HPP is not
sufficient for the system supply.
Interlinking block with additional power supply if the
module to the right of the CPX−CM−HPP requires an
additional power supply, but the space is not sufficient
for the additional power supply.
Note
Additional information on the power supply and the
interlinking block can be found in the CPX system
description P.BE−CPX−SYS−...
16 Festo P.BE−K−CPX−CM−HPP 0910NH English