Festo CPX-CM-HPP Brief Description page 13

3 Installation instructions
Warning
Before carrying out installation and maintenance work,
switch off the following:
if applicable, the compressed air supply
the operating voltage supply for the electronics/
sensors
the load voltage supply for the outputs/valves
3.1 Mounting/Dismounting
The CPX−CM−HPP is mounted in an interlinking block of the
CPX terminal.
1
Screws,
Tightening torque
0.9 ... 1.1 Nm
2
CPX−CM−HPP
3
Interlinking block
with contact rails
Festo P.BE−K−CPX−CM−HPP 0910NH English
1
2
3
13