Technical Data; Preparation For Use - Otto Bock 3R67 Instructions For Use Manual

In the illustration, a reference number shown in bold stands for a package in which the product
components shown in the frame can be reordered.
Only product components with reference numbers in the illustration can be reordered separately.

6 Technical data

The technical data are shown in Figure
: System height (SH);

7 Preparation for use

7.1 Information on fabrication of a prosthesis
CAUTION
Incorrect alignment, assembly or adjustment
Risk of injury due to change in or loss of functionality
► Assembly, adjustment and maintenance operations may only be completed by qualified per­
sonnel.
► Observe the alignment, assembly and adjustment instructions.
CAUTION
Initial use of the prosthesis by the patient
Fall due to lack of patient experience, incorrect alignment or incorrect adjustment of the pros­
thesis
► For the safety of the patient, use a suitable device (e.g. parallel bars, handrail, wheeled
walker) during initial standing and walking.
7.2 Bench alignment of the prosthesis
► CAUTION! To enable the patient to stand safely, align the prosthesis using the alignment
images for the sagittal plane (Figure
page 5) as well as the instructions for use of all prosthetic components that were used.
Installing the tube adapter (
CAUTION
Incorrect mounting of the tube
Risk of injury due to breakage of load-bearing components
► Clean the contact surfaces of the tube and the tube adapter using a degreasing cleaning
agent.
► Position the tube in the tube adapter so the minimum insertion depth is met.
► Use the smallest value for the allowable insertion depth as the minimum insertion depth.
: Allowable insertion depth: ≥ 30 mm
→
: Unallowable insertion depth: < 30 mm
→
CAUTION
Improper assembly of the screw connections
Risk of injury due to breakage or loosening of the screw connections
► Clean the threads before every installation.
► Apply the specified torque values.
► Follow the instructions regarding the length of the screws and about how to secure the
screws.
2
on page 3.
: Proximal system height (PSH);
3
on page 4) and for the frontal plane (Figure
4
on page 5 –
: Distal system height (DSH)
)
4
on
23