WEG CFW-11W G2 RB Series User Manual page 96

WEG Item
(material Name
number)
11008162 IOA-01
11008099 IOB-01
Flash Memory Module to Install in Slot 5 - Included in Standard Models
11719952 MMF-03
11008913 HMI-01
11010521 RHMIF-01
11010298 HMID-01
10950192 HMI CAB-RS-1M
10951226 HMI CAB-RS-2M
10951223 HMI CAB-RS-3M
10960846 CONRA-01
10960847 CCS-01
Cabos Fibra/Sinal
13555095
2,5 m
Cabos Fibra/Sinal
13555150
3,0 m
Cabos Fibra/Sinal
13555151
3,6 m
13353317 RACK G2 2 UP11
13353316 RACK G2 3 UP11
14235116 RACK G2 2 UP11W
14235117 RACK G2 3 UP11W
14267304 CTSRB-T4
14267307 CTSRB-T6
(1) Refer to the programming manual.
(2) Use cable to connect the HMI to the inverter with D-Sub9 (DB-9) male and female connectors with pin to pin connection (mouse extension type) or Null-Modem
type. Maximum length 3 m.
Examples:
- Mouse extension cable - 1.80 m; Manufacturer: Clone.
- Belkin pro series DB9 serial extension cable 5 m; Manufacturer: Belkin.
- Cables Unlimited PCM195006 cable, 6 ft DB9 m/f; Manufacturer: Cables Unlimited.
(3) Refer to the rack mounting guide.
Table 7.1: Accessory models
Description
Control Accessories to Install in Slot 1
IOA Module: 1 analog 14-bit input in voltage and current; 2 digital inputs; 2
analog 14-bit outputs in voltage and current; 2 open collector digital outputs
IOB Module: 2 isolated analog inputs in voltage and current; 2 digital inputs;
2 isolated analog outputs in voltage and current (same output programming
as the standard CFW-11); 2 open-collector digital outputs
Flash memory module
Separate HMI, Blind Cover and Frame for External HMI
Separate HMI
(2)
Frame kit for HMI remote (IP56 protection rating)
Blind cover for HMI slot
Serial cable for remote HMI 1 m
Serial cable for remote HMI 2 m
Serial cable for remote HMI 3 m
Others
Control rack (containing the CC11 control board)
Shield kit for control cables (supplied with the product)
Fiber and Signal Cable Set - 2.5 m
Fiber and Signal Cable Set - 3.0 m
Fiber and Signal Cable Set - 3.6 m
Rack for panel mounting of 2 UP11 G2 units
Rack for panel mounting of 3 UP11 G2 units
Rack for panel mounting of 2 UP11W G2 units
Rack for panel mounting of 3 UP11W G2 units
Synchronism transformer set: input voltage 380 - 480 V
Synchronism transformer set: input voltage 500 - 690 V
Optional Items and Accessories
(3)
(3)
(3)
(3)
CFW-11MW G2 RB | 7-3
Identification
Parameters
Slot
P0027 P0028
1 FD-- ----
1 FA-- ----
5 ---- --xx
(1)
HMI - -
- -
-
HMI - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
7
- - -
- - -
- - -