Receiving And Storage - WEG CFW-11W G2 RB Series User Manual

General Information

2.7 RECEIVING AND STORAGE

The UP11 and UP11W G2 power units are supplied in a wooden box.
The UC11RB G2 control units are supplied in a cardboard box.
The package bears a copy of the identification label affixed to the converter.
2
To open the package:
1. Remove the front cover of the package.
2. Remove the styrofoam protection.
Check if:
1. The identification labels correspond to the models purchased.
2. Damages during transportation.
Report any problems immediately to the carrier.
If the products are not immediately installed, store them in a clean and dry place (temperature between -25 ºC
and 60 ºC), with a cover to prevent the ingress of dust.
Figure 2.11: Do not tilt the power units
CFW-11MW G2 RB | 2-11