5.6 FLASH MEMORY MODULE
Location according to
Figure 5.4 on page
Flash Memory Module
Functions:
It stores an image of the converter parameters.
It allows transferring parameters stored in the flash memory module to the converter.
It allows transferring firmware stored in the flash memory module to the converter.
For further details, refer to the Programming Manual of the CFW-11 RB.
ATTENTION!
To connect or disconnect the flash memory module, first turn off the converter, wait for the discharge
of the capacitors and then turn off the electronics power supply (+24 V).
5-5.
Figure 5.4: Detail of location of the flash memory module
Energization and Start-Up
CFW-11MW G2 RB | 5-5
5