Installation and Connection
DC+
DC-
3
Figure 3.34: DC output terminals of the UP11W G2
DC+: Positive pole of the DC output voltage.
DC-: Negative pole of the DC output voltage.
On the UP11 G2 (air-cooled), the U, V and W connections are made through 3 screws M12X45 (recommended
torque: 60 N.m; see
Figure 3.35 on page
3-29. The screw used to fasten the grounding cable of the UP11 G2
is M12X25 (recommended torque: 60 N.m).
3-28 | CFW-11MW G2 RB