The shield of the ICUP board is mounted with four screws M6 (recommended torque: 8.5 N.m).
Figure 3.26: Mounting of the control rack and necessary slots in mm (in)
[11.2]
283.6
Figure 3.27: Mounting of the base of the ICUP module in mm (in)
Installation and Connection
190
ø 5.2 (4X)
(7.48)
(0.20)
R8 (4X)
(0.32)
186.5
(7.34) 93.3
7 (0.27)
[0.2]
R4 (4x)
CFW-11MW G2 RB | 3-21
(3.67)
7 (0.27)
11
(0.43)
3