WEG CFW-11W G2 RB Series User Manual page 59

Installation and Connection
3
The electronics of the UP11 G2 and UP11W G2 is powered via connector XC6, located on the IUP board; it is
described in Table 3.25 on page
XC6
1
2
3
3-40 | CFW-11MW G2 RB
Figure 3.48: Identification of the control connections
3-40.
Table 3.25: Description of connector XC6
Function
+24 Vdc Positive pole of the +24 Vdc power supply
NC Not connected
GND Reference of the +24 Vdc power supply
XC6: Power supply
24 Vdc (UP11 G2
control)
Fiber optics connectors
(connections to the
ICUP board)
XC40: Connector
DB25 (connection
to the ICUP board)
Specifications
24 Vdc power supply(± 3 %)
Consumption: 750 mA per UP11 G2