WEG CFW-11W G2 RB Series User Manual page 56

Figure 3.43 on page 3-37, showing the CSR11 synchronism board, displays connector XC1, which receives the
signals coming from the synchronism transformers. Connector XC50, which makes the interconnection with the
CC11 RB control board, is also shown.
3-38 shows the board assembly inside the UC11RB G2.
ATTENTION!
Shielded cables must be used to connect the signals to connector XC1 of the synchronism board. It is
recommended to ground the cable shield according to
Figure 3.44 on page 3-37
XC50
XC1
Figure 3.43: Synchronism board
Figure 3.44: Connection of the CSR11 synchronism board
Installation and Connection
shows this connection and
Item 3.4.11.3 Conexões CC11 on page
CFW-11MW G2 RB | 3-37
Figure 3.45 on page
3
3-46.