WEG CFW-11W G2 RB Series User Manual page 48

Installation and Connection
3
Figure 3.35: Input terminals U, V, W and ground on the UP11 G2
On the UP11W G2 (water-cooled), the U, V and W connections are made through 12 screws M12X25 (recommended
torque: 60 N.m; see Figure 3.36 on page 3-30). Two screws M12X25 (recommended torque: 60 N.m) are used
to fasten the grounding cable of the UP11W G2.
CFW-11MW G2 RB | 3-29