WEG CFW-11W G2 RB Series User Manual page 61

Installation and Connection
3
XC60: Connection
to control rack
The control rack is powered via connector XC9, located on the ICUP board; it is described in
XC9
1 +24 Vdc Positive pole of the +24 Vdc power supply
2 NC
3 GND
DIP switches S1 and S2,
alternating supply voltage and the number of UP11 G2 or UP11W G2 connected.
3-42 | CFW-11MW G2 RB
XC67: No used DIP
switches
S1 and S2
Figure 3.50: ICUP board connection points
Table 3.28: Description of connector XC9
Function
Not connected
Reference of the +24 Vdc power supply
Figure 3.51 on page 3-42, have the function, respectively, to select the level of the inverter
S1
Figure 3.51: Detail of DIP switches S1 and S2
Fiber optics
connectors reserved
for WEG use
24 Vdc power supply (± 3 %)
Consumption: 1.25 A
Fiber optics connectors
(connection to UP11)
Connectors DB25
XC40A to XC40E
(connection to UP11)
XC5: DIM1 and DIM2
digital inputs
XC9: 24 Vdc
power supply
Table 3.28 on page 3-42.
Specifications
S2