Part List - WEG CFW-11W G2 RB Series User Manual

Installation and Connection
From 2000 m to 4000 m (6.600 ft to 13.200 ft) - maximum voltage (690 V for models 500...690 V) derating of
„
1.1 % for each 100 m (330 ft) above 2000 m (6.600 ft).
Maximum altitude of 4000 m (13.200 ft).
„
Air relative humidity: 5 % to 95 % non-condensing.
„
Pollution degree: 2 (according to EN50178 and UL508C), with non-conductive pollution. Condensation must
„
not cause conduction of the accumulated residues.

3.2.2 Part List

3
For the panel mounting of the CFW11W G2 RB, it is necessary: control set, UP11W G2 power units and cable
sets to connect the UC11RB G2 to the UP11W G2.
G2 inverter.
Qty
UP11W-01 G2
ND
1 780
2 1482
3 2223
4 2964
5 3705
WEG Item
14267304
14267307
The panel builder must provide the other parts of the drive. Among those parts are the power busbars, pre-charge
circuit, panel internal cooling, protection fuses and input filters.
3-10 | CFW-11MW G2 RB
Table 3.6: Part List - CFW-11W G2 500 - 600 V Drives
Rated Current [A]
Qty UC11 G2
HD
640
1216
1824
2432
3040
WEG Item
13555095
13555150
13555151
Table 3.8: Synchronous transformer set items
Synchronism transformer set: input voltage 380 - 480 V
Synchronism transformer set: input voltage 500 - 690 V
Table 3.1 on page 3-1
Qty
Synchronization
Transformers Set
1 1
1 1
1 1
1 1
1 1
Table 3.7: Cable set items
Cable Set
2.5 m Cables
3.0 m Cables
3.6 m Cables
Synchronism Transformer Set
contains the part list of the CFW11W
Qty Cable Qty Cable
Set 2.5 m Set 3.0 m
1 -
2 -
- 1
2 1
- 3
Qty Cable
Set 3.6 m
-
-
2
1
2