Button Label Generator; Using The Software - Extron electronics CrossPoint 450 Plus 84 HV User Manual

im Vertrieb von
Matrix Software, cont'd
Button-Label Generator
The Button Label Generator software creates labels that you can place in the
translucent covers of the input and output pushbuttons. You can create labels with
names, alphanumeric characters, or even color bitmaps for easy and intuitive input
and output selection. See appendix B, Reference Information, for blank labels and
procedures for removing and replacing the translucent covers.
The program is contained on the same set of 3.5-inch diskettes as the Matrix
Switcher+ Control Program and is installed automatically when you install that
program.
By default, the Windows installation goes in either the C:\MTRX50 directory, if
installed automatically with the Matrix Switcher+ Control Program, or the
C:\BUTTONS directory, if installed as a stand-alone program. The Button-Label
Generator icon is placed in the "Extron Electronics" group or folder.

Using the software

1.
Figure 5-12 — Extron's Button-Label Generator window
2.
3.
4.
Access the Help program by clicking on the Help menu. Click on the Help menu
on the main screen, choose Show Help, and click on the Load Demo button to see
an example of a completed Extron's Button-Label Generator window.
www.camboard.de
5-20 CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
CAMBOARD Electronics
To run the Button-Label Generator program, double-click on the
Button-Label Generator icon (shown at right) in the Extron
Electronics group or folder, and click OK when prompted. The
Button-Label Generator window appears (figure 5-12).
Under System selection, choose SGS 408 (this selection matches the button
size of these CrossPoint 450 Plus and MAV Plus switchers).
Using normal Windows controls, you can create and print labels that can be
placed in the label windows on the front panel of the switcher.
Press the Clear All button to create new labels as many times as necessary to
make all of the button labels that you need.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de