Table of Contents
Advertisement
im Vertrieb von
HTML Operation, cont'd
Change the input gain and attenuation (audio models only)
Users can set each input's level of audio gain or attenuation (-18 dB to +24 dB) from
the RGB and Audio Settings page. Audio levels can be adjusted so there are no
noticeable volume differences between sources.
Change an input's audio level setting as follows:
1.
Figure 6-12 — Input selection drop box
2.
3.
4.
Figure 6-13 — Gain drop box
5.
www.camboard.de
6-14
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
CAMBOARD Electronics
Click the Input drop box. A drop down scroll box appears (figure 6-12).
Click and drag the slider or click on the scroll up
button until the desired input is visible.
Click the desired input.
Click the Input Audio Level (dB) drop box. A drop down scroll box appears
(figure 6-13).
Click the desired gain or attenuation value.
Tel. 07131 911201
Fax 07131 911203
button or scroll down
ce-info@camboard.de
Advertisement
Table of Contents
