Extron electronics CrossPoint 450 Plus 84 HV User Manual page 153

im Vertrieb von
Mute and unmute one or all outputs
www.camboard.de
CAMBOARD Electronics
Mute one or all outputs as follows:
1. To select an individual output to mute or unmute, click the Output drop box.
A drop down scroll box appears (figure 6-14).
Figure 6-14 — Output selection drop box
Click and drag the slider or click the scroll up
2.
button until the desired output is visible.
3. Click the desired output.
4. Click the Video, Audio, or Follow button to select video, audio, or both for
muting. Each mouse click on a button toggles the other two buttons off.
5. Click the Mute or UnMute button to mute or unmute the selected output.
Click the Mute All or UnMute All to mute or unmute all of the outputs.
Observe the Mute status indications on the page (figure 6-15). Unmuted is
displayed in green and muted is displayed in red.
Figure 6-15 — Mute status indications
Tel. 07131 911201
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
Fax 07131 911203
button or scroll down
ce-info@camboard.de
6-15