Table of Contents
Advertisement
im Vertrieb von
Matrix Software, cont'd
Tools menu
Assign device icons — Displays the complete set of input
Edit device palette — Allows you to add your own device
RGB delay settings — Displays the switching interval
Audio-Input gain settings — Displays the audio gain level
Audio-Output volume settings — Displays the audio
View input frequencies — (DSVP) Displays the input horizontal and vertical
Update firmware — Allows you to replace the firmware that is coded on the
IP options — Allows you to set IP options. See IP Settings/Options window on
HTML file manager — Displays a list of HTML files installed on the switcher and
Hardware status — Provides an overall view of the status of the matrix switcher,
Figure 5-9 — Status window
www.camboard.de
5-16
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
CAMBOARD Electronics
and output device icons. You can drag any of these
icons to the input and output boxes.
icon graphics.
setting for each input and allows you to change them.
setting for a single input or for all inputs and allows
you to change it. The level is expressed as the
magnitude (number of decibels) and polarity (positive,
gain or negative, attenuation) of the audio adjustment.
output level setting for a single input or for all inputs and allows you to
change it. The level is expressed as a percentage of the input audio volume
that is applied to the output; 0% is full attenuation (audio is silent), 100% is
full volume.
frequencies for each input.
switcher's control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the firmware chip set. See Update
firmware on page 5-12.
page 5-6.
allows you to upload custom files from a connected PC to the switcher. See
Upload HTML files on page 5-14.
including the primary and secondary power supply status and the individual
voltages, the fan and temperature status, the Remote RS-232/RS-422 port
configuration, and the installed and updated firmware status (figure 5-9).
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
Advertisement
Table of Contents
