Extron electronics CrossPoint 450 Plus 84 HV User Manual page 107

im Vertrieb von
Command/response table for SIS commands
Command
Create ties
• Commands can be made back-to-back, with no spaces.
For example: 1*1!02*02&003*003%4*24$.
• The quick multiple tie and tie input to all output commands activate all I/O switches
simultaneously.
• The CrossPoint 450 Plus and MAV Plus support 1-, 2-, and 3-digit numeric entries
(1*1, 02*02, or 001*001).
Tie input to output , video (V)
X2 X3
and audio (A)
Example:
Tie input to output , RGBHV only
X2 X3
Example (see Note):
Tie input to output , video only
X2 X3
Example (see Note):
The & tie command for RGB and the % tie command for video can be used interchangeably on
the CrossPoint 450 Plus and MAV Plus switchers.
Tie input to output , audio only
X2 X3
Example:
Quick multiple tie
Example:
Tie input to all outputs, V & A
Example:
Tie input to all outputs, RGBHV only
Example (see Note):
Tie input to all outputs, video only
Example (see Note) :
The & tie all command for RGB and the % tie all command for video can be used
interchangeably on the CrossPoint 450 Plus and MAV Plus switchers.
Tie input to all outputs, audio only
Example:
Read ties
Read RGBHV output tie
Read video output tie
The & read tie command for RGB and the % read tie command for video can be used
interchangeably on the CrossPoint 450 Plus and MAV Plus switchers.
Read audio output tie
Digital Sync Validation Processing (DSVP)
List individual sync frequency
Example:
The matrix switcher returns 000.00
applicable.
www.camboard.de
CAMBOARD Electronics
ASCII Command Response
(host to switcher)
* !
X2 X3
1*3!
* &
X2 X3
10*4&
* %
X2 X3
7*5%
* $
X2 X3
12*24$
+Q * !... *
Esc X2 X3 X2 X3
+Q3*4!3*5%3*6$
Esc
*!
X2
5*!
*&
X2
28*&
*%
X2
14*%
*$
X2
1*$
&
X3
%
X3
$
X3
LS
X1
2LS
,
Tel. 07131 911201
CrossPoint 450 Plus and MAV Plus Switchers • Programmer's Guide
Fax 07131 911203
Additional description
(switcher to host)
Out •In •All Tie input
X3 X2
to output
Out03 •In01•All Tie input 1 V & A to output 3.
Out •In RGB Audio breakaway.
X3 X2
Out04•In10•RGB Tie input 10 RGB to output 4.
Out •In •Vid Audio breakaway.
X3 X2
Out05•In07•Vid Tie input 7 video to output 5.
Out •In •Aud Audio breakaway.
X3 X2
Out24•In12•Aud Tie input 12 audio to output 24.
!
Qik
Qik Tie input 3 video and audio to
output 4, tie input 3 video to
output 5, and tie input 3 audio to
output 6.
In •All
X2
In05•All Tie input 5 video and audio to all
outputs.
In •RGB
X2
In28•RGB Tie input 28 RGB to all outputs.
In •Vid
X2
In14•Vid Tie input 14 video to all outputs.
In •Aud
X2
In01•Aud Tie input 1 audio to all outputs.
RGBHV input
X2
X3
Video input
X2
Audio input
X2
,
Listed as H freq., V freq.
X15 X15
,
031.50 060.00 Input 2 frequency is 31.5 kHz
horizontal and 60 Hz vertical.
000.00 if there is no connection or sync frequencies are not
ce-info@camboard.de
's video and audio
X2
.
X3
tied to output
X2
.
tied to output .
X2 X3
tied to output .
X2 X3
4-7