Extron electronics CrossPoint 450 Plus 84 HV User Manual page 73

im Vertrieb von
www.camboard.de
CAMBOARD Electronics
4. One at a time, press and hold the Output 3 and then the Output 4 buttons
(figure 3-52) for approximately 2 seconds until the buttons begin to blink. The
output 3 and output 4 video and audio signals are muted.
Mute outputs one at a time.
2 seconds
3
Press and hold the Output 3 button.
2 seconds
4
Press and hold the Output 4 button.
= Blinking button
Figure 3-52 — Mute the outputs
If both RGBHV/video and audio are selected, the mute action toggles both the
video and audio outputs. If either the video output or the audio output is
already muted, the unmuted output is muted and the muted output is
unmuted.
If both RGBHV/video and audio are selected and only video is muted, the
output button flashes between green and amber. If only audio is selected, the
output button flashes between red and amber.
One at a time, press and hold the Output 3 and then the Output 4 buttons
5.
(figure 3-53) for approximately 2 seconds until the buttons lights steadily. The
output 3 and output 4 video and audio signals are unmuted.
Mute outputs one at a time.
2 seconds
3
Press and hold the Output 3 button.
2 seconds
4
Press and hold the Output 4 button.
= Blinking button
Figure 3-53 — Unmute the outputs
Tel. 07131 911201
CrossPoint 450 Plus and MAV Plus Switchers • Operation
Fax 07131 911203
The button blinks amber to indicate that
the RGBHV and audio outputs are muted.
The button blinks amber to indicate that
the RGBHV and audio outputs are muted.
The button lights amber to indicate that
the RGBHV and audio outputs are not muted.
The button lights amber to indicate that
the RGBHV and audio outputs are not muted.
ce-info@camboard.de
3
4
3
4
3-33