Ricoh 2105 Operating Instructions Manual page 93

Note
❒ For advanced settings, click
[Detail] to display the Detail
window. For information
about the Detail window, see
TWAIN driver Help.
C According to the settings of
[Document:] and [Orientation:],
change the other setting of the
[Document] group.
Reference
p.39 "For a Network TWAIN
Scanner"
For information about mak-
ing settings for the [Docu-
ment] group, see TWAIN
driver Help.
When you want to configure the
scanning area
When you do not configure the
scanning area, the area scanned is
the size specified in the [Size:] box.
A Click [Preview].
The original that was placed is
scanned and the [Preview] dialog
box appears. The scanning area
in the preview is displayed
within the broken lines.
B Configure the scanning area by
dragging a border or a corner.
When reconfiguring the area,
click and drag one corner of
the area towards or away from
its opposite corner.
Note
❒ Depending on the scanning
resolution, the area to be
scanned may be subject to re-
strictions.
C Click [Close].
Note
❒ If the original preview is dis-
played, a network TWAIN
scanner cannot be used from
other client computers or
other scanner functions until
pressing [Scan] or [Close].
D D D D
Click [Scan].
When there is another original to
scan, place the original, and then
click [Continue]. When there are no
more originals, click [Complete].
E E E E
Save the scanned image in Desk-
TopBinder V2 Lite.
A On the [File] menu, click [Exit].
B Enter the file name, and then
click [OK].
The image is stored in DeskTop-
Binder V2 Lite, and DeskTop-
Binder Viewer closes.
- Editing and printing scanned - - -
data
With DeskTopBinder V2 Lite, it is
possible to edit and print scanned da-
ta. For more information about how
to edit and print, see DeskTopBinder
V2 Lite Help.
Scanning Originals
87
7