Ricoh 2105 Operating Instructions Manual page 54

Sending Stored Scan Data by E-mail
E Select a destination.
F Press [Exit].
4
Checking selected destinations
A Use the destination field at the
top of the screen to check
which destinations are select-
ed.
Note
❒ When multiple destinations
are selected, the selected des-
tinations are displayed in the
order they were selected by
pressing [ U U U U Previous] or
[T T T T Next].
❒ Pressing the { { { { Check Modes} } } }
key on the control panel lets
you check the list of selected
destinations.
G G G G
Make the basic settings.
To make the basic settings, recall
stored settings or make the settings
individually.
Reference
p.13 "Basic Settings"
Recalling stored scan settings
A Press [Recall Program].
48
B Select a user program of scan
settings.
C Press [OK].
The selected user program set-
tings are applied.
Making the settings individually
A Press [Scan Settings].
B Select items such as resolution
and original size, and then
change their settings.
Scan settings can be made in the
same way as basic settings. See
p.13 "Basic Settings".