Ricoh 2105 Operating Instructions Manual page 57

Note
❒ When [Return Receipt] is se-
lected, an e-mail notifying
that the e-mail has been read
by the destination party is
sent to the sender selected
here. However, if the mailing
software used by the destina-
tion party does not support
MDN (Message Disposition
Notification), the setting in
[Return Receipt] becomes in-
valid.
D Press [OK].
Searching for a sender to select
There are two ways to search a
sender: searching it by destination
name or index, or searching it by e-
mail address.
A Press [Attach Sender's Name].
B Press [Search].
Procedure for Sending E-mail
C Press [Destination Name].
To search using e-mail address-
es, press [E-mail Address].
The soft keyboard is displayed
for entering a destination name
or for entering an e-mail ad-
dress.
D Enter the sender name or the e-
mail address.
Note
❒ You can also search by enter-
ing the first character or char-
acters of the sender name or
the e-mail address.
❒ It is also possible to perform
a combined search using
[Destination Name] and [E-mail
Address].
❒ It is necessary to discriminate
between uppercase and low-
ercase letters.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
E Press [OK].
4
51