Ricoh 2105 Operating Instructions Manual page 58

Sending Stored Scan Data by E-mail
F Select the sender.
Note
❒ If a password has been set, a
4
screen for entering the pass-
word appears after selecting
the sender. Enter the pass-
word, and then press [OK].
After verification of the pass-
word, the sender name is dis-
played.
G Press [Exit].
H For a reception confirmation e-
mail, press [Return Receipt].
52
I Press [OK].
Note
❒ When [Return Receipt] is select-
ed, an e-mail notifying that the
e-mail has been read by the
destination party is sent to the
sender selected here. Howev-
er, if the mailing software used
by the destination party does
not support MDN (Message
Disposition Notification), the
setting in [Return Receipt] be-
comes invalid.
J J J J
If required, select a subject.
Select a subject from the registered
ones. See p.21 "Subject Settings".
Note
❒ The selected subject name is au-
tomatically placed in the Subject
field of the e-mail.
❒ There are two ways to select a
subject, selecting it from the list
or entering it directly.
When selecting a subject from
the list
A Press [Attach Subject].