Ricoh 2105 Operating Instructions Manual page 52

Sending Stored Scan Data by E-mail
When selecting a destination
from the list
A Press the title for the destina-
tion. The destinations for that
title are displayed.
If the destination is not dis-
played, press [U U U U ] or [T T T T ] to dis-
play the destination.
4
B Select the destination to which
the scan data is to be sent.
The selected destination is high-
lighted and also is displayed in
the destination field at the top of
the screen.
C To select more destinations, re-
peat step B B B B .
Note
❒ To deselect a destination, press
the destination once more, or
press [U U U U Previous] or [T T T T Next] to
display the destination in the
destination field, and then
press the { { { { Clear} } } } key.
46
Using a short ID number to select
a destination
A Press [Registration No.].
B Use the number keys to enter
the five-digit short ID number
that has been assigned to a des-
tination.
If the entered number is less
than five digits long, press the
{ { { { #} } } } key after the last number.
Example: To enter 00003
Press the { { { { 3} } } } key, and then
press the { { { { #} } } } key.
C To select more destinations, re-
peat steps A A A A and B B B B .
Note
❒ To deselect a destination, press
[U U U U Previous] or [T T T T Next] to dis-
play the destination in the des-
tination field, and then press
the { { { { Clear} } } } key.
Manual entry of an e-mail
address
A Press [Manual Input].
The soft keyboard is displayed
for entering the e-mail address.
B Enter the e-mail address.
Note
❒ It is possible to use letters,
numbers, and periods. The
symbols ()\,;:" cannot be used.