Ricoh 2105 Operating Instructions Manual page 104

Appendix
Message
Sending the data to the delivery server has failed. The
data will be sent later.
Sending the data to the SMTP server has failed. Check
[Scanned File Status] to confirm the result.
Sending the data to the SMTP server has failed. The data
will be sent later.
8
The destination list has been updated. The specified des-
tination(s) or sender's name has been cleared.
The entered E-mail address is not correct. Please re-en-
ter.
The entered password is not correct. Please re-enter.
The original is left on the exposure glass.
The output buffer is full. Sending the data has been can-
celled. Please try again later.
98
Causes and solutions
While a file was being sent to the de-
livery server, a network error oc-
curred and the file could not be sent
correctly. Wait until delivery is re-
tried automatically after the preset
interval. If the delivery fails again,
consult the network administrator.
While a file was being sent to the
SMTP server, a network error oc-
curred and the file could not be sent
correctly. Try the operation once
more.
If the message is still shown, the net-
work may be crowded. Consult the
network administrator.
If multiple files were sent, use the
Scanned Files Status screen to check
for which file the problem occurred.
See p.68 "Checking the Status of De-
livery" and p.55 "Checking the Sta-
tus of E-mail".
A network error has occurred and a
file was not sent correctly to the
SMTP server. Wait until delivery is
retried automatically after the preset
interval. If the delivery fails again,
consult the network administrator.
A specified destination or sender's
name was cleared when the destina-
tion list in the delivery server was
updated.
Specify the destination or sender's
name again.
Make sure the e-mail address is cor-
rect, and then enter it again.
Enter the password again.
• When placing an original on the
exposure glass, remove it after
scanning.
• Remove the original on the expo-
sure glass before scanning origi-
nals in the ADF.
Too many files are waiting to be de-
livered. Please try again after they
have been delivered.