Ricoh 2105 Operating Instructions Manual page 103

Message
No HDD is available for this function. Cannot store. Set
original and select the TWAIN settings from the PC.
Out of paper in Tray 1.
Out of paper. Load one of the following paper sizes.
A3S, B4 JISS, A4S, A4R...
Scanner is currently in use by another function. Switch
to another function to confirm the status.
Note
❒ These messages appear alternately.
No sender's name has been specified. It is necessary to
specify sender's name when sending E-mails. No send-
er's name has been specified. Specify sender's name.
Note
❒ These messages appear alternately.
Sending the data has been cancelled. The selected file(s)
contain some deleted file(s). Try again after checking the
stored file(s).
Sending the data has failed due to insufficient memory
in the delivery server.
Sending the data has failed due to insufficient memory
in the SMTP server.
Sending the data to the delivery server has failed. Check
[Scanned File Status] to confirm the result.
Causes and solutions
Files can be scanned with TWAIN by
switching to the network TWAIN
scanner function.
Load paper in the tray indicated.
Load paper of the sizes listed in the
message.
The machine is using another func-
tion such as copying. Retry scanning
after the operation with the other
function is completed.
A sender's name should be specified
before sending e-mail. Send e-mail
after specifying the sender's name.
After the files were selected, some
files were deleted with DeskTop-
Binder V2 Lite/Professional. Per-
form the selection process again.
There is not enough free space on the
hard disk of the delivery server. Free
up the required amount.
There is not enough free space on the
hard disk of the SMTP server. Free
up the required amount.
While a file was being sent to the de-
livery server, a network error oc-
curred and the file could not be sent
correctly. Try the operation once
more.
If the message is still shown, the net-
work may be crowded. Consult the
network administrator.
If multiple files were sent, use the
Scanned Files Status screen to check
for which file the problem occurred.
See p.68 "Checking the Status of De-
livery".
Troubleshooting
8
97