Ricoh 2105 Operating Instructions Manual page 56

Sending Stored Scan Data by E-mail
C For a reception confirmation e-
mail, press [Return Receipt].
Note
4
❒ When [Return Receipt] is se-
lected, an e-mail notifying
that the e-mail has been read
by the destination party is
sent to the sender selected
here. However, if the mailing
software used by the destina-
tion party does not support
MDN (Message Disposition
Notification), the setting in
[Return Receipt] becomes in-
valid.
D Press [OK].
Using a short ID number to
specify a sender name
A Press [Attach Sender's Name].
50
B Use the number keys to enter
the five-digit short ID number
that has been assigned to a
sender.
If the entered number is less
than five digits long, press the
{ { { { #} } } } key after the last number.
Example: To enter 00006
Press the { { { { 6} } } } key, and then
press the { { { { #} } } } key.
Note
❒ If a password has been set, a
screen for entering the pass-
word appears after selecting
the sender. Enter the pass-
word, and then press [OK].
After verification of the pass-
word, the sender name is dis-
played.
C For a reception confirmation e-
mail, press [Return Receipt].