Ricoh 2105 Operating Instructions Manual page 25

❖ ❖ ❖ ❖ File Type Priority
Select whether to send the data of
scanned originals using a single
page, a multi-page TIFF, or a
multi-page PDF.
Note
❒ If you specify a multi-page TIFF
format for data in a JPEG for-
mat, the format is automatically
changed to a PDF format. See
p.89 "Relationship between
Resolution and Data Size".
❖ ❖ ❖ ❖ Job Reset Time in Adding Original
When SADF mode is specified, se-
lect whether or not the machine
waits for another original to be set
after all originals in the Auto Doc-
ument Feeder (ADF) or on the ex-
posure glass have been scanned.
Note
❒ If neither the SADF mode or
Batch mode is specified when
scanning, this setting becomes
invalid and the machine ends
the scanning operation without
waiting for more originals.
• If [Off] is selected, the count-
down does not occur and the
machine enters the waiting state
when all originals in the ADF
have been scanned in SADF
mode or Batch mode until an-
other original is inserted or the
{ { { { #} } } } key is pressed.
• If [On] is selected, enter the
number of seconds (3 - 900) for
the Job Reset Time in Adding
Original with the number keys.
When an original is placed
within this time, it is scanned as
part of the same document as
the previously scanned origi-
nals. However, when Batch
mode is specified, the machine
stays in the waiting state re-
gardless of the setting time until
another original is inserted or
the { { { { #} } } } key is pressed.
❖ ❖ ❖ ❖ Original Setting
Set the default for whether origi-
nals are one-sided or two-sided
and if two-sided, the relationship
between those sides. When the
originals are always the same, set
this for the default to make opera-
tion easier. You can select [1 Sided
Original], [2 Sided Original: Top to
Top], or [2 Sided Original: Top to Bot-
tom].
Reference
p.37 "Original Orientation and
Scan Area"
❖ ❖ ❖ ❖ Original Feed Type Priority
When placing additional originals
in the ADF, select whether to add
sheets individually or to add
batches. If [Off] is selected, the
scanning operation ends after the
initially placed originals are
scanned without the machine
waiting for additional originals to
be placed in the ADF.
Initial Scanner Setup
19
2