Inserting And Securing The Shelf To The Cabinet (Shoulder Screw Configuration); Truss Head Screws - Dell EMC PowerProtect DD9900 Installation Manual

Table 4 Truss head screws
Truss head screw from kit
Procedure
1. For Dell EMC racks, use the orange shelf latch handles to push the shelf completely into the
cabinet. Align the two semi-captive M5 shoulder screws on each side with the mounting
holes on the cabinet. Thread the shoulder screws into the mounting holes and finger-tighten
the shoulder screws.
Figure 27 Inserting and securing the shelf to the cabinet (shoulder screw configuration)
To install the shelf into a third-party rack that is not compatible with the M5 shoulder
l
screws, do the following:
Part number and
description
036-032-010
Screw, M5-0.8x12, Truss
Head Phillips with patch
036-032-011
Screw, M6-1.0x12, Truss
Head Phillips with patch
036-032-009
Screw, 10-32x.5, Truss Head
Phillips with patch
036-032-012
Screw, 12-24x.5, Truss Head
Phillips with patch
Dell EMC PowerProtect DD9900 System Installation Guide
Install the Disk Shelves in the Rack
Suggested use
Can be used in Dell EMC
racks and third-party non-
threaded hole racks.
Can be used in non-Dell EMC
racks.
Can be used in non-Dell EMC
racks.
Can be used in non-Dell EMC
racks.
41