Pins For Third-Party Racks - Dell EMC PowerProtect DD9900 Installation Manual

Table 3 Pins for third-party racks
Rail Pins from kit
4. Install the right rail to the rack rear channel. You can adjust the rails later, if necessary. The
following figure shows the installation details.
Refer to Figure 22 on page 37 while performing the tasks in this step.
Part Number and Description Suggested Use
036-028-018
Custom screw, M4 x 10MM
(Quantity: 4 per kit)
036-028-016
3.8MM Alignment Pin
(Quantity: 8 per kit)
036-028-017
4.8MM Alignment Pin
(Quantity: 8 per kit)
Dell EMC PowerProtect DD9900 System Installation Guide
Install the Disk Shelves in the Rack
Used for any third-party rack.
Can be used in racks with
threaded holes.
Used in racks that have M5,
#10, or #12 threaded holes.
Used in racks that have M6
threaded holes.
35