Rail Kit Components; Sliding Rail Assembly - 3U Systems - Dell EMC PowerProtect DD9900 Installation Manual

Table 2 DD9900 system racking locations (continued)
Component
FS25 location with DS60
shelves
DS60 locations

Rail kit components

The 3U sliding rail kits secure the server in the cabinet and enable it to be extended from the
cabinet to remove the system cover and access the internal field-replaceable units (FRUs).
The rails are compatible with racks with square holes, unthreaded round holes, and threaded round
holes.
Figure 6 Sliding rail assembly - 3U systems
The rails are compatible with racks with square holes, unthreaded round holes, and threaded round
holes.
The rail kit also includes a unique cable management (CMA) bracket assembly that consists of
inner and outer brackets, and screws to attach the brackets to the rails.
Configuration
Single node and HA
Single node or HA
1. Sliding rail (2)
2. Hook-and-loop strap (2)
Dell EMC PowerProtect DD9900 System Installation Guide
Install the System in the Rack
Rack location
U39-40
U02-U11, U20-U34
21