Attaching Cable Chains To Tray; Installing The Chassis Bracket Into The Shelf; Inch Graduation Label - Dell EMC PowerProtect DD9900 Installation Manual

Install the Disk Shelves in the Rack
6. Align the lids of the cable chains so the lids are facing up and the hinges are all facing each
7. Attach the Cable Chains to the tray, by attaching the clips onto the tabs on the rear of the
8. Snap the chassis bracket clips into the brackets on the side of the chassis.
Dell EMC PowerProtect DD9900 System Installation Guide
48
the rack, while the two inside cable runs connect to the shelf. Once the cables are installed,
close the lids, making sure that they are snapped shut.
Figure 39 1-Inch graduation label
other. Arrange the two cable chains so that they form a "U" shape.
Figure 40 Attaching cable chains to tray
tray.
Figure 41 Installing the chassis bracket into the shelf
CL5500
CL5522