Securing Enclosure To The Front Of The Cabinet; Transferring Parts From The Faulted Dpe To The Replacement Dpe - Dell EMC Unity Series Replacement Manual

Field Replacement Procedure

Transferring parts from the faulted DPE to the replacement DPE

Unity All Flash and Unity Hybrid Field Replacement Procedure
16
Figure 6 Sliding the enclosure onto the rails
2. Secure the front of the enclosure to the front vertical channels of the cabinet
using four screws (two per side) by installing all four screws, and then
tightening them.
Figure 7 Securing enclosure to the front of the cabinet
Use the procedures in this section to transfer the components from the faulted DPE
to the corresponding locations in the replacement DPE.
To help ensure the correct placement in the enclosure:
CL5343
CL5752