Table of Contents
Advertisement
Authorized Customer Use
6.4.3. Repeater Alarms
Click the
Repeater Alarms
figure below. All LEDS should be green colored, except for the "Door Open",
"VSWR", "PAmp Current Measure" and "PAmp FWD Measure" which are colored red.
For alarms description refer to RMT User Guide P/N: 300MB40080 p.17-20.
Figure 7: Repeater Alarms tab
1. Choose the desired power from the PAmp FWD Threshold dial box. This
value will trigger the alarm.
22
tab in order to monitor the repeater states as shown in the
Repeater's
Alarms tab
Release 1.00
Advertisement
Table of Contents
