Dimming Mode Settings; Dmx Signal Loss Settings; Fan Mode Settings; Power Output Settings - Blizzard Lighting Cyc Out User Manual

Dimming Mode Settings:

Allows users to set the fixture to use 1 of 4 (x2) dimming curve settings for smoother (and slower)
dimming capabilities. In the control panel menu, there are two settings for each curve that are
distinguishable from one another by the trailing dot.
Linear Curve
(LIN, LIN.)
DMX%
*The curve settings with the trailing dot adds a bit more delay to the curve for a smoother effect.
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to SET and press <ENTER>,
then <UP/DOWN> buttons again to scroll to DIM, and press the <ENTER> button.
2.) Now use the <UP/DOWN> buttons to highlight either LIN (Linear), SQR (Square), ISQR
(Inverse Square), SCUR (S-Curve), LIN. (Smooth Linear), SQR. (Smooth Square), ISQR.
(Smooth Inverse Square), or SCUR. (Smooth S-Curve), and press <ENTER>.

DMX Signal Loss Settings:

Choose a default fixture output in the case of DMX signal loss.
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to SET, and press <ENTER>,
then use the <UP/DOWN> buttons to scroll to NO DMX, and press <ENTER>.
2.) Now use the <UP/DOWN> buttons to highlight KEEP (hold last signal), BLACKOUT, or
STAT (output the static setting value), and press <ENTER>.

Fan Mode Settings:

Set the cooling fans to SMART cooling, or continually ON.
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to SET and press <ENTER>,
then use the <UP/DOWN> buttons to scroll to FAN, and press <ENTER>.
2.) Now use the <UP/DOWN> buttons to highlight ON (continually on), or SMART (automatic,
temperature controlled), and press <ENTER>.

Power Output Settings:

Manually set the power output mode.
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to SET and press <ENTER>,
then use the <UP/DOWN> buttons to scroll to OUTPUT, and press <ENTER>.
2.) Now use the <UP/DOWN> buttons to highlight MAX (100%, for use with strobe only),
CYC-HI (70%), or CYC-LOW (50%), and press <ENTER>.

Fixture Information:

These are not editable features, they are for informational purposes only.
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to INFO and press <ENTER>,
then use the <UP/DOWN> buttons to highlight SOFT, TEMP, or POW, and press <ENTER>.
2.) The SOFT information simply displays the current software version installed, TEMP displays
the current board temperature, and POW displays the fixtures current power level setting.
Under normal conditions, it will be at 100%... but this fixture has built-in overheat protection
that may automatically reduce the output level to 80%, or 50% in high temperature situations.
Cyc Out™ User Manual Rev. D
Square Law Inverse Square Law
(SQR, SQR.)
DMX%
Page 13
(ISQR, ISQR.)
DMX%
© 2017 Blizzard Lighting, LLC
S-Curve
(SCUR, SCUR.)
DMX%